4.10.5. PERMITTED COMMERCIAL, INSTITUTIONAL, MIXED-USE, AND INDUSTRIAL SIGNS.
A. Applicability. These standards shall apply to all commercial, institutional, mixed-use, and industrial development unless otherwise specified in this UDO, Site Plan, Master Plan, Adjustment, or Variance.
B. Wall, Projecting, Blade, and Monument Signs.
1. Number of Permitted Signs. A total of five signs are permitted per use, with a total of 80 square feet minimum.
2. Total Sign Area Allowed.
a. Arterial Streets. On arterial street frontages, two square feet of sign area for each linear foot of building frontage for the first 100 feet, then one-half square feet of sign area for each linear foot of building frontage thereafter as measured along the building frontage (the longest building frontage with a public entrance), up to the limit in Subsection c. below.
b. All Other Streets. On all other street frontages, one square feet of sign area for each linear foot of building frontage for the first 200 feet of building frontage; then one-half square feet of sign area for each linear foot of building frontage thereafter as measured along the building frontage (the longest building frontage with a public entrance), up to the limit in Subsection c below.
c. Maximum Total Sign Area. Maximum total sign area shall not exceed 600 square feet.
d. Maximum Individual Sign Area. No individual sign shall exceed 200 square feet.
e. Additional Sign per Tenant or Business. Each tenant or business is permitted one blade sign up to a maximum of six square feet. in addition to the signs listed in Subsections a. through d. above.
C. Monument Sign Standards. Monument signage is considered as one of the five types of signs allowed and is included in the total allowable square footage as calculated above.
1. Location of Monument Signs.
a. Monument signs shall be located on the Site Plan showing size of sign face, setback, and sight triangle.
b. If any monument sign is located in an easement, a revocable license must be obtained prior to permit issuance.
c. No monument sign may be erected in a median.
2. Maximum Height. The maximum height of monument signs shall be determined by the location as follows, measured from grade to top of sign:
a. Along arterial streets: 12 feet
b. Along all other streets: 8 feet
3. Total Sign Area Allowed. The maximum size of a monument sign face is 100 square feet, unless otherwise noted in this Section 146-4.10.
D. Large Scale Retail Single-Tenant Use (over 50,000 sq. ft.).
1. Number of Permitted Signs.
a. May be extended from six to a total of eight signs through an Administrative Adjustment pursuant to Section 146-5.4.4.F.
b. One monument sign per street frontage for those single retail uses that have more than 150 feet of street frontage, plus one additional monument sign is permitted provided that a separation of 150 feet is maintained between monument signs.
2. Total Sign Area Allowed. Two square feet per linear feet of building frontage to maximum total sign area of 800 square feet.
3. Location of Monument Signs.
a. Minimum of four feet from back of sidewalk or 21 feet from flow line; and
b. Shall not be placed within any applicable site triangle.
4. Motor Vehicle Dispensing Uses.
a. Choose either the primary linear frontage of the canopy or building for calculating the maximum sign area, but not both.
b. Length of accessory car wash buildings may not be used to calculate sign area.
5. Donation Collection Bins. Two kiosk mounted signs are permitted, limited to a maximum of six square feet each.
6. Small Recycling Centers. One sign permitted, limited to a maximum of 20 square feet.
E. Wall and Monument Signs for Properties with Multiple Tenants, Businesses, or Users.
1. In addition to signs permitted by Subsections B, C, and D above, properties with multiple tenants, businesses, or users are permitted one additional wall or monument sign for each public street or highway abutting the project. The additional sign may be located on the lot where the primary building in the project is located, or on any lot in a designated on a Master Plan covering multiple lots.
2. The maximum size of the additional sign shall not exceed 100 square feet per sign face, and the maximum height of the additional sign shall not exceed 14 feet. (Ord. No. 2019-49 § 1, 08-19-2019)