2.3.5. RESIDENTIAL -- HIGH-DENSITY DISTRICT (R-4).
A. Purpose. The purpose of the R-4 district is to allow for high-density residential development to occur in close proximity to arterial or collector streets, public transit facilities, and other public amenities. Uses in this district include a diverse range of housing types ranging from single-family and two-family residences to the highest density multifamily housing and limited lodging and rooming facilities. Some of the higher density developments may include ground floor commercial uses. Development of neighborhood services should include convenient automobile, bicycle, and pedestrian connections to nearby residential uses. The R-4 district also generally permits home occupations, neighborhood services, medical facilities, and some limited office uses. Other uses are as shown in Table 3.2-1 (Permitted Use Table).
B. Cross-References to Other Applicable UDO Sections. All development and redevelopment must comply with all applicable sections of this UDO. A short summary of some of the key sections is shown below.
Table 2.3-5 Cross-References to Other Applicable UDO Sections |
|
---|---|
Use Regulations |
Article 146-3 |
Dimensional Standards |
Section 146-4.2 |
Neighborhood Protection Standards |
Section 146-4.4 |
Lot Access and Connectivity |
Section 146-4.5 |
Parking, Loading, and Stacking |
Section 146-4.6 |
Landscaping, Screening and Stormwater Management (including fence and wall regulations) |
Section 146-4.7 |
Building Design Standards |
Section 146-4.8 |
Signs |
Section 146-4.10 |
C. Dimensional Standards.
Basic dimensional standards for the R-4 zone district are in Table 4.2-1 and Table 4.2-2, and more detailed standards are located throughout Section 146-4.2 (Dimensional Standards). (Ord. No. 2019-49 § 1, 08-19-2019)